Precautions for use of thermal protector accessories

1. When using contact temperature-sensing installation, the metal cover should be close to the installation surface of the controlled appliance. To ensure the temperature-sensing effect, the temperature-sensing surface should be coated with thermally conductive silicone grease or other thermally conductive medium with similar properties.
2. Do not collapse, loosen or deform the top of the cover during installation, so as not to affect the performance.

3. Do not let liquid penetrate into the inside of the temperature controller, do not crack the shell, and do not arbitrarily change the shape of the external terminals. .
4. When the product is used in a circuit with a current not greater than 5A, the copper core cross-section should be 0.5-1㎜ 2 wires for connection; when the product is used in a circuit with a current not greater than 10A, the copper core cross-section should be 0.75-1.5㎜ 2 wires connect.
5. The product should be stored in a warehouse where the relative humidity is less than 90% and the ambient temperature is below 40°C, which is ventilated, clean, dry and free of corrosive gases.